clean air-conditioning is an increase in air-conditioning unit on the basis of air purification, meet the design requirements of cleanliness levels and provide adequate external static pressure to overcome the wind pipe and the end of the high efficiency filter resistance.
1, regulation of air temperature, humidity and cleanliness, belong to the "third degree" air conditioning, you can also attach sterilization function.
2, the air filtration efficiency class F8, can be set to F9, H10 level.
3, the unit offers 100-10000Pa of external static pressure, sufficient to overcome the wind pipe and the end of the high efficiency filter resistance, regardless of the pressurized tank.
4, according to project needs, choose evaporative cooling mode or chilled water type, heat pump heating mode selectable heating, electric heating, steam heating or water heating; humidification mode selectable electrode type humidifier or steam humidification and so on.
This product is suitable for "Good Manufacturing Practice" (GMP) for pharmaceutical manufacturers, health care, electronics, biotechnology, food and beverage, instrumentation, precision machinery, aerospace and other on air temperature, humidity, cleanliness there places stringent requirements.
a host
1, chillers
(1), screw chillers
- screw compressors with high reliability and new efficient heat transfer technology, energy efficiency up to 5.09;
- Using the new thin thread tooth efficient heat exchanger, heat transfer coefficient is 1.3 times the ordinary high-pipe;
- Compressor with five heavy security, completely eliminate the rotor stuck, motor overheating burning phenomenon;
- The controller has a status display, parameter setting, a number of control functions of energy fuzzy control, fault inquiries. Environmentally friendly screw chiller.
(2), overflowing water-cooled screw host
- using special screw-type compressors and overflowing overflowing evaporator heat transfer technology, the unit energy efficiency up to 5.6;
- The use of new low-wing refrigerant distributor of heat transfer tubes flooded strong design and optimization, heat transfer coefficient is three times the conventional dry-type evaporator unit, effectively improve the unit cooling capacity and energy efficiency;
- The unit uses seven heavy security, and on the high and low pressure, exhaust temperature, water temperature, such as real-time monitoring and control, to ensure safe operation of the unit;
- The unit may be fuzzy principle stepless air conditioning compressor capacity based on changes in water temperature to match the actual air-conditioning load, energy-saving effect is remarkable.
(3), screw water source heat pump
- using special screw-type compressors and overflowing overflowing evaporator heat transfer technology, the unit energy efficiency up to 6.4;
- The use of new low-wing refrigerant distributor of heat transfer tubes flooded strong design and optimization, heat transfer coefficient is three times the conventional dry-type evaporator unit, effectively improve the unit cooling capacity and energy efficiency;
- The unit uses seven heavy security, and on the high and low pressure, exhaust temperature, water temperature, such as real-time monitoring and control, to ensure safe operation of the unit;
- The unit may be fuzzy principle stepless air conditioning compressor capacity based on changes in water temperature to match the actual air-conditioning load, energy-saving effect is remarkable.
2, air-cooled host
(1), environmentally friendly air-cooled heat pump units (R134a)
- environmentally friendly refrigerants, energy efficient;
- Through the national energy certification, energy efficiency up to 3.25
- Efficient and hydrophilic aluminum tubes in order to achieve the best effect of heat transfer;
- Made of high quality steel and phosphate by electrostatic spray, strong and generous;
- Activities combinations, quiet and comfortable, easy installation and maintenance.
(2), modular air-cooled heat pump
- through the national energy certification, energy efficiency up to 3.25;
- Efficient and hydrophilic aluminum tubes in order to achieve the best effect of heat transfer;
- Made of high quality steel and by electrostatic spray, strong and generous;
- Activities combinations, quiet and comfortable, easy installation and maintenance.
two, the end product
1, module modular air conditioning units
- modular air conditioning unit uses a combination of two columns tenon sided metal unit without cold bridge insulation board structure.
- Panel frame for the patented design of aluminum structures.
- Refrigeration and air conditioning coil imported copper and aluminum spoiler dedicated seamless aluminum fins, 14Mpa pressure rose tube, can adapt to the high-pressure pipe without any danger of leakage and ensure minimal contact resistance and high heat transfer efficiency ;
- Box board are bolt nuts, convenient on-site installation and removal;
- Internal smooth, hard fouling for purifying places.
2, fan coil
- high purity seamless copper tube, louvered sinusoidal hydrophilic aluminum fins and using 12 Mpa pressure rose brass and aluminum tubes to ensure close integration of higher coil heat transfer efficiency;
- Fire-resistant ABS wind wheel, static and dynamic balance is good, small starting torque, Pittsburgh suture, no leakage;
- Electrodes using oil bearings, smaller noise;
- Pressure rose brass tube to ensure no leakage by up evenly;
- Overall stamping water dish, external overall PE, full insulation;
- Lightweight, can be easily swapped around the field type, easy installation and maintenance.
3, air handling units (horizontal, vertical, hanging)
- splicing using tenon no cold bridges between the tenon-post double-sided metal insulation board structure, panels, insulation, air tightness good effect;
- Unit outer panel quality steel and color-coated steel surface coating, at right angles to the rear panel connector assembly forming an arc structure, clear and smooth appearance;
- All bolts and nuts box board are connected, can be easily removable;
- Refrigeration and air conditioning coil imported special aluminum spoiler seamless aluminum fins and copper production, the end plate flange through a unique treatment.